How To Remove Kitchen Faucet? Top Full Guide 2022

How To Remove Kitchen Faucet Top Full Guide 2022

Removing a kitchen faucet is a relatively easy task that can be completed in a few minutes with the right tools. This article will show you how to remove kitchen faucet and replace it with a new one. Let’s start now!

Pick Up Key Parts At The Hardware Store Before You Start

You may need to visit more than one hardware store to get the parts you need. However, this list will give you a better chance of completing the job quickly and easily. This article will show you how to take out a kitchen faucet.

Shutoff valves: Before shopping for a new faucet, make sure you look under the sink to ensure that shutoff valves are feeding the faucet. Add shutoff valves if you don’t already have them. If you have shut-off valves, make sure they are working by turning on hot and cold water and closing the valves. Install new faucets if the faucet is still dripping. You probably have 1/2-in—copper supply pipes. Add easy-to-install, solderless compression-fitting valves to your shopping cart. If not, you can choose any valve compatible with your lines.

Supply tubes: Measure the supply tubes and buy new stainless-steel-sleeved tubes. They are designed to provide years of uninterrupted service and can be used around obstacles without kinking.

Basin wrench: You can also buy a basin wrench. This little wrench is designed to remove and install difficult-to-reach fasteners that attach older faucet assemblies. Modern faucets come with plastic Wing-Nuts, easily loosened or tightened manually. The spring-loaded jaws of a basin wrench pivot so that you can loosen nuts or pull them in tight places.

Pick Up Key Parts At The mounting Hardware Store Before You Start

Using a pipe wrench, you can remove drain lines to reach the faucet. A standard tubing cutter is best for cutting copper tubes. If your copper supply lines are located within a few inches from the cabinet’s back, you can purchase a mini tube cutter.

A set of open-end wrenches is also necessary for connecting and disconnecting the water lines.

Take a photo or draw the layout before you disconnect the drain lines. This will help you to put it back together.

How to remove a kitchen sink TIP:

  • You can replace your faucet at any time during store hours. There are 50/50 chances that you will need at least one additional part to complete this kitchen faucet replacement project.
  • Grab a piece of plywood and place it on a 1-qt. Paint cans should be placed in front of the cabinet. This how-to replace kitchen faucet project will make you feel more at ease if you’re able to lie down under the sink. If the edge of your sink cabinet were to dig into your back, it would be a problem.

Gain Access To The New Faucet And Take It Out

Gain Access To The New Faucet And Take It Out

If the garbage disposer is wired directly, unplug it or turn off the circuit breaker in the main panel. Place a 1-gal of water under the dishwasher discharge line.

To cushion the disposer when it falls free, place a 1-gal. Paint the can underneath the garbage disposal. You can release the disposer by taping the retaining rings with a hammer in an anticlockwise direction.

Once you have removed all the old vases, cleansers, and buckets from under the sink, you can now lie down and check if the faucet is accessible.

how to remove a kitchen faucet

The main obstructions will likely be the P-traps and pipes that drain the sinks. It would help if you weren’t afraid of pulling them out. But, it’s essential to replace them with newer ones. Older, chrome-plated drain pipes may become so corroded they can be crushed by a pipe wrench, slip-joint, or pliers.

You can match them later at the store if you have all of the parts removed. Plastic drain parts are best removed with care. They can usually be reused.

Sometimes, a garbage disposal can weigh as much as 20 pounds. Roadblock. Removing the blockage and reinstalling it once the faucet is installed is not difficult. To remove it, unplug it from the cabinet and lift it out of its place.

If the disposer is hard-wired, turn off the circuit breaker and disconnect it from the sink. Then, place it inside the cabinet with the attached electrical cable.

First, disconnect the water supply lines to remove the old faucet. If the shutoff valves are not present and the water pipes are connected directly to the faucet supply line, or if defective valves are being replaced, you will need to turn off the main water supply valve and disconnect the water lines.

Before turning on the water again to your house, ensure that the new valves have been closed. Use the basin wrench to remove the old faucet.

Sometimes it is impossible to remove the old faucet nuts despite all your efforts. Relax! You can try again by soaking the threads in penetrating oil. If this doesn’t work, you need to pull the sink until the nuts can be found. It is not difficult to do.

For a clamp-down sink, remove the screws from the bottom. Or, use a utility knife to cut the caulk between the countertop and drop-in sink. Then lift the sink out. You can then remove the old faucet utilizing a pipe wrench or locking pliers.

TIP:

  • Install the faucet first before you install the kitchen sink.

If you want to have a new appearance for your kitchen, read our article:  How To Accessorize A Kitchen Counter?

How To Install A Kitchen Faucet

It was so easy to remove the old faucet. The kit includes everything you need and can be installed in just minutes.

Install The Deck Plate (Optional)

Some faucets can either be fitted with a three-hole or single-hole kitchen sink. Deckplates are used to cover extra holes. These are usually used to separate cold and hot temperature knobs. This piece is not necessary if you only have one hole sink.

How To Install A Kitchen Faucet

TiteSeal deck plates have a built-in seal. No need to use silicone or putty! Although it may seem loose now, once the faucet has been installed, the whole unit will become watertight.

Drop The Faucet Tubes Through The Hole

Grab all the tubes hanging from the bottom of your spout body and place them in the middle hole. You should ensure that the metal bracket on the left is vertical.

Drop The Faucet Tubes Through The Hole

Secure The Faucet To The Sink

After everything has been inserted, make sure you check the underside of your sink to ensure that the bracket is horizontal.

Here’s the cool thing: This model doesn’t need to be tightened from below, so you don’t have to use a basin wrench. Turn the faucet clockwise by inserting the Pfister Top Pfit device into the faucet body. Getting the horizontal brace up to the sink’s underside will take a while. When tension builds up, you will know that you are close.

Secure The Faucet To The Sink

Remove the tool from the faucet base once it stops turning. Next, drop the spray hose down from the faucet neck through the body and click the channel in place.

Connect The Faucet Supply Lines

Miri faucet includes all water lines, so you don’t need to reuse any of the ones you have already removed.

Connect the red supply to the hot water line (left) and the black to the cold water pipe (right). Before tightening the connections, I recommend covering the threads in Teflon tape. This video will show you how to apply Teflon tape for a secure fit properly.

Connect The Spay Headline

The braided sprayed line brings together hot and cold water and delivers it to your faucet. Be sure to thread the end through the weight in a donut shape before attaching it. This weight will pull the sprayer head into place when you are done.

Connect The Spay Headline

The braided sprayed line can be connected with a click. Finally, tighten the nut. Clip the Top Pfit tool onto the sprayer or cold water lines so that you always have it handy in case you need to draw, remove or change the faucet.

Test For Leaks

Please turn on the faucet, and let it run for about a minute to check for leaks. Check all connections for water leakage and tighten any that are. You can check again in the next 48 hours to ensure everything is functioning correctly. You’re done if everything is dry.

It’s easy to replace your kitchen faucet by yourself, as you can see. You can save money by buying a beautiful kitchen faucet instead.

The pull-out nozzle makes it easy to clean up, and the nozzle clicks back in place, so it doesn’t fall out of your hand when you’re not using it.

how to remove a kitchen sink faucet

It doesn’t need to be complicated and can make a huge difference in your kitchen.

Consider installing a soap dispenser in your kitchen sink if you have an extra hole. This simple project can be done quickly, especially if the tools are already available to replace the faucet.

Maybe you need the method to clean the kitchen sink drain, see this article.

Required Tools To This How-To Replace A Kitchen Faucet Project

You’ll save time, frustration, and money by having all the tools you need to replace a faucet in your kitchen.

  • 4-in-1 screwdriver
  • Adjustable wrench
  • Hammer
  • Handsaw
  • Pipe wrench
  • Slip joint pliers
  • Tube cutter
  • Wrench set
  • Basin wrench

Required Materials For This How To Replace A Kitchen Faucet Project

You can avoid last-minute shopping trips by having all the materials you need in advance to change a new kitchen faucet. Here is a list.

  • 150-grit sandpaper
  • Tubes of stainless steel supply made from braided stainless
  • New faucet
  • P-trap
  • Shutoff valves

Maybe you need:  How To Install Kitchen Cabinets?

FAQs

Is it necessary to hire a PLUMBER to replace a FAUCET?

Nope! No need to hire a plumber to replace your faucet. A few simple tools, such as a basin wrench, should take less than an hour to replace a faucet. You can use the same methods for both bathroom and kitchen faucets.

how to remove old kitchen faucet

A plumber can usually install the most faucets for $150 to $150 if you are uncomfortable doing it yourself. You will pay more for labor and parts if you need additional plumbing work, such as rerouting the pipes underneath the sink.

A handyperson can remove your old faucet and put in a new one. A handyman is usually less expensive than a licensed plumber.

How do I choose the right faucet?

When choosing the kitchen or bathroom faucets, there are several things you should consider.

My old kitchen faucet was too low for me. The faucet was too small to hold a large pot, so filling and washing them was tedious. You can store more oversized items in a taller kitchen faucet.

In our upstairs bathroom, however, the problem was quite the opposite! With a tall faucet, the medicine cabinet wouldn’t open. I had to find something shorter.

Finish

When choosing a finish to your new faucet, consider the metal finish in the room. Consider the cabinet door handles and drawer pulls, and pick a complementary color.

how to remove kitchen faucet with sprayer

It is also worth considering how the faucet’s finish will resist fingerprints and water spots. Some faucets have a spot-resistant coating that will keep them looking cleaner for longer.

The number of holes in the sink deck

Before you buy a new faucet, take a look underneath your sink. There’s a chance of more sinkholes underneath a deck plate under your faucet neck. To avoid surprises during installation, it is better to be aware of what you are dealing with.

A single-hole faucet can be used in a three-hole sink. However, a three-hole faucet cannot be used in a single sink. Three-hole faucets will come with separate hot and cold handles to adjust the temperature. Single-hole faucets will feature a handle at the neck of the faucet to turn on the water supply and mix hot and cold water.

Video

Conclusion

In this article, we’ve shown you what to look for when buying a kitchen faucet and how to install one. Peelsnyc also showed you the proper method of using faucets and how to repair a dripping kitchen faucet. Hopefully, you will find this helpful article.

If you have any questions or comments, please leave them in the comments section below.